After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.
As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.
The standards require RTOs to perform two types of validation.
The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.
The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
A Deep Dive into Assessment Validation
As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
We will dedicate this article to assessment tool validation.
How Assessment Tool Validation is Conducted
After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.
When Assessment Tool Validation Should Be Done
Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.
However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:
- update your resources
- new training products are added to your scope
- review your course against training product updates
- your learning resources get identified as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
Choosing Training Products for Validation
Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.
Getting Started with Assessment Tool Validation: Resources Needed
Study Resources
Given that you are validating your assessment tools, you will need the complete array of your learning resources:
Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.
Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.
Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates created independently from the workbook and marking guide. Validate them to ensure they are suitable for the assessment task and address unit requirements.
Panel for Validation
Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
As a whole, your validation panel must have:
Relevant vocational competencies and industry skills for the unit being validated
Current knowledge and skills related to vocational teaching and learning
Any one of these training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it provides documentation that you have validated your resources before students use them.
ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.
Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.
We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:
Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Does the assessment ensure equal opportunity and access for everyone?
Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?
Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment produce the same results every time, regardless of who conducts the training? Will different assessors consistently decide on skill competence?
Rules of Evidence
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work belongs to the candidate?
Currency – Do the assessment tools mirror current units of competency and modern industry practices?
Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To avoid employing learning resources that fail to meet all unit requirements, be sure to follow these guidelines:
Practice What You Preach
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence here requirement requires students to:
Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
diapering
prepare bottles, bottle-feed babies and sanitize equipment
solid food prep and feeding infants
respond suitably to infant signs and cues
prepare and settle infants for sleep
monitor and encourage age-appropriate physical exploration and gross motor skills
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Look Out for Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
Entire or Not Competent
Mind the lists. Again, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity
Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What types of information can be included in a work package?
The answer could include:
Needed resources
Relevant expenses
Time frame for activities
Assigned roles and responsibilities
When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.
This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – work area isolation, engineering, PPE
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolating, use of engineering controls, administrative controls
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolating, use of engineering controls, administration
Equipment or machinery – isolation, use of engineering controls, administration
Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.
Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.